logger configuration (p. 30) for more information on configuring the module in the different
modes.
The Provisioning Report received with your Cellular Data Service shows whether the module was
configured with a private dynamic or public static IP address. See FIGURE 4-1 (p. 9) for an
example of a Campbell Scientific Provisioning Report. Other cellular providers should provide
similar information.
FIGURE 4-1. Static IP provisioning report
Additionally, Campbell Scientific cellular modules configured with a public static IP address will
have two stickers on the module, as shown in FIGURE 4-2 (p. 9). One sticker will show the
module phone number and data plan. The second sticker will show the static IP address.
Campbell Scientific cellular modules configured with a private dynamic IP address will have one
sticker on the module. It will show the module phone number and data plan.
FIGURE 4-2. Module with public static IP address
CELL200-Series 4G LTE Cellular Module 9
To Next Page
Loading...