Campbell CELL205 - Page 39

Table 6-1: CELL200 series data logger compatibility chart
Data logger model
Connecting to CELL200 series
via CS I/O port
Connecting to CELL200 series
via RS- 232 port
CR510-PBandCR10X-PB
SC12 CS I/O cable
(serial server only)
(SDC7 and SDC8 only)
SC105 CS I/O to RS-232 adapter
CR23X N/A
RS-232 null modem cable
(serial server only), or
SC105 CS I/O to RS-232 adapter
CR23X-PB
SC12 CS I/O cable
(serial server only)
(SDC7 and SDC8 only)
RS-232 null modem cable
(serial server only), or
SC105 CS I/O to RS-232 adapter
FIGURE 6-1 (p. 27), FIGURE 6-2 (p. 28), and FIGURE 6-3 (p. 28) illustrate the most common
communication connections between a data logger and a CELL200 series.
CS I/O connection using an SC12 cable
The SC12 is used to connect the module to a data logger CS I/O port.
FIGURE 6-1. CS I/O connection
CELL200-Series 4G LTE Cellular Module 27