7.2.2 Mounting procedure
1. If using a crossarm, attach the mounting tube to the crossarm by using the CM220 Right
Angle Mounting Kit, then mount the crossarm to the tripod or tower (FIGURE 7-1 (p. 14)).
FIGURE 7-1. ClimaVUE50, MetSENS, or WindSonic Mounting Pipe Kit and crossarm
2. Loosely mount the ClimaVUE 50 to the tripod mast, CM300-series pole, or mounting tube
by using the V-bolt, washers, and nuts (FIGURE 7-2 (p. 14)).
FIGURE 7-2. ClimaVUE 50 mounted to a pole with V-bolt and nuts
ClimaVUE 50 Compact Digital Weather Sensor 14
To Next Page
Loading...