7.2.3 Optional bird spike kit
NOTE:
With the bird spike kit installed, dips in the pyranometer data may occur (<6% error in total
daily solar radiation during clear sky conditions). Correct installation reduces possible errors.
For more information, refer to Effects of bird spike kit on solar radiation data (p. 26).
The optional bird-spike kit helps discourage birds from roosting on the ClimaVUE 50. The kit
consists of a plastic ring with flexible spikes. When installed, the spikes point upwards and
extend 10.2 cm (4 in) above the funnel. Their shape and location minimize interference with rain
and solar measurements. The spikes are designed not to hurt the birds.
The plastic ring includes secondary spike positions that can be drilled by the user to install
additional short spikes. The additional spikes are to be provided by the user.
Items included in kit:
(13) Spikes (includes one spare)
(1) Spike ring
Required tools (not included):
(1) Pliers
Bird-spike kit installation procedure:
1. Count all parts to ensure nothing was lost in shipping.
2. Gently press a bird spike into a slot on the bird spike ring by hand.
3. Using pliers, pinch the bird spike near its base and press down until it is fully seated.
ClimaVUE 50 Compact Digital Weather Sensor 17
To Next Page
Loading...