terminals. Short Cut is available as a download on www.campbellsci.com. It is included in
installations of LoggerNet, RTDAQ, PC400, and PC200W.
The following procedure also shows using Short Cut to program the ClimaVUE 50.
1. Open Short Cut and click Create New Program.
2. Double-click the data logger model.
3. In the Available Sensors and Devices box, type ClimaVUE or locate the sensor in the
Sensors > Meteorological > Basic Weather folder. Double-click ClimaVUE 50.
ClimaVUE 50 Compact Digital Weather Sensor 3
To Next Page
Loading...