Clearing Staple Jams
3-79
3
Troubleshooting
Clearing Staple Jams
If a staple jam occurs, follow the procedure described below to remove the jammed staples.
Finisher-S1 (Optional)
If a staple jam occurs in the optional Finisher-S1, a screen similar to the one shown below appears
on the touch panel display. Check the location of the staple jam, and follow the procedure described
below, and the procedure that appears on the touch panel display, to remove any jammed staples.
Make sure to close all covers and paper drawers of the machine before clearing any staple jams.
To Next Page
