Routine Cleaning
2-54
2
Routine Maintenance
Routine Cleaning
If the original is not copied clearly, clean the following parts of the machine. For high-quality
printouts, we recommend cleaning these parts once or twice a month.
Platen glass
Underside of the platen cover
Feeder's rollers
When cleaning the machine, first turn OFF the main power switch, and disconnect the power cord.
Failure to observe these steps may result in a fire or electrical shock.
Do not use alcohol, benzene, paint thinner, or other solvents for cleaning. Doing so may result in
damage to the plastic parts.
Disconnect the power cord from the power outlet regularly, and clean the area around the base of
the power plug's metal pins and the power outlet with a dry cloth to ensure that all dust and grime
is removed. If the power cord is connected for a long period of time in a damp, dusty, or smoky
location, dust can build up around the power plug and become damp. This may cause a short circuit
and result in a fire.
•
•
•
•
•
•
To Next Page
Loading...
Need help?
General
