Sample Reports
4-8
4
Appendix
Send TX Report/Send Error TX Report
The Send TX Report is a printed report that informs you of whether a send job has been successfully
delivered to its destination. A Send TX Report can be set to print automatically after each job is sent,
or only when there are transmission errors. (See e-Manual > Send/Fax.)
If the optional Color Universal Send Kit (standard-equipped for the imageRUNNER 3245i/3235i) is activated, the
results of e-mail, I-fax, file server, and User Inbox transmissions are printed. Even if [Report with TX Image] is set to
'On', the contents of the sent document are not printed on the report if the document was sent using the Encrypted
PDF mode.
If the optional FAX Board is installed, the results of fax and User Inbox transmissions are printed.
You can also print a Send TX Report with an image of the sent original attached to it. (See e-Manual > Send/Fax.)
JOB NO.
The four digit number, that is automatically assigned when the document is accepted for sending, is printed.
DEPT. ID
If Department ID Management is set, the Department ID is printed.
ST. TIME (Start Time)
The date and time (in 24-hour notation) at which the document started to transmit are printed.
PGS.
The number of pages that were sent is printed.
•
•
•
■
■
■
■
To Next Page
Loading...
Need help?
General
