Installation Location and Handling
1-5
1
Before You Start Using This Machine
Do not remove the machine's leveling feet.
Do not remove the machine's leveling feet after the machine has been installed. If you put weight on the front
of the machine while the drawers or units within the machine are pulled out, the machine may fall forward. To
prevent this from happening, make sure that the machine's leveling feet are in place.
Select a Safe Power Supply
Plug the machine into a 120 V AC outlet.
Make sure that the power supply for the machine is safe, and has a steady voltage.
Do not connect other electrical equipment to the same power outlet to which the
machine is connected.
Do not connect the power cord to a multiplug power strip, as this may cause a fire
or electrical shock.
The power cord may become damaged if it is often stepped on or if heavy objects
are placed on it. Continued use of a damaged power cord can lead to an accident,
such as a fire or electrical shock.
■
■
■
■
■
■
To Next Page
Loading...
Need help?
General
