Canon CARPS2 - Trimming Pages When Creating Saddle Stitched Booklets

Trimming Pages When Creating Saddle Stitched
Booklets
When stapling in the middle to form a booklet, you can trim and align the edges of the pages.
1
Display the [Main] sheet.
2
Select [Booklet Printing].
You can also set [Booklet Printing] in the [Layout] sheet.
3
Select [On] from [Staple] → select [Saddle stitch] as the stapling position.
You can also set [Staple] in the [Finishing] sheet.
4
Display the [Finishing] sheet.
5
Select [Trim].
To set a trim width adjustment method, follow the procedure below.
6
Click [Details].
7
In the [Adjust Trim Width] dialog box, set a trim width adjustment method.
If [Adjust By] is displayed, selecting [Finishing width] trims the pages to the specied height and width after
nishing.
8
Click [OK].
Related Topics
[Main] Sheet(P. 115)
[Layout] Sheet(P. 118)
[Finishing] Sheet(P. 124)
Saddle Stitched Booklet Printing(P. 88)
Creating a Booklet
90