Uninstalling the Software
W-110
5
Delete the camera information in the [Scanners and Cameras]
dialog box.
For Windows XP or Windows Me,
select and right-click the camera
that you are using and then select
[Delete] from the menu that
appears. When the confirmation
message appears, click the [Yes]
button.
For Windows 2000 or Windows 98
SE, select the camera that you are
using and click the [Remove]
button.
If the camera that you are using is
not displayed in the [Scanners and
Cameras] dialog box or the
[Scanners and Cameras
Properties] dialog box, close the
dialog box and proceed as follows.
If drivers for other devices such as scanners are already installed, those device names
are displayed. Take particular care not to delete the wrong driver.
6
Display [Device Manager] (W-107).
7
Delete the camera information from [Device Manager].
For Windows XP and Windows 2000 users:
To Next Page
Loading...
