Shot Settings
M-80
You can download saved tone curves from a computer and register up to three (M-39) as tone
curve data on the camera. You can also select the tone curve data that has been loaded into
the [TCD 1] through [TCD 3] tab sheets, from the list box shown in “Specifying the Parameters”
(M-78).
For more information on registering the tone curve data ([TCD 1] through [TCD 3]) on the
camera, refer to “Setting the Processing Parameters” in the camera’s Instruction Manual.
1
Click the [Tone curve] button (M-77).
The [Tone curve settings] dialog
box appears.
2
Select the [TCD 1], [TCD 2] or [TCD 3] tab.
3
Click the [Open] button.
The [Open] dialog box appears.
4
Open the folder containing the tone curve, select a file, and then
click the [Open] button.
The tone curve is loaded.
Specifying the Tone Curve
To Next Page
Loading...
