Canon EOS-1D - Sets the Number of Shots to be Bracketed; Changes the Bracketing Sequence for C.fn-09-2;3 to Increased Exposure, Standard Exposure, and Decreased Exposure

Personal Function Settings
W-66
Repeats bracketing during continuous shooting
 While you hold down the shutter button, bracketing repeats continuously in the currently
selected drive mode.
 This function is useful when you want to continuously repeat the bracketing sequence.
Sets the number of shots to be bracketed
 Select the number of shots from the list box.
 The usual 3-frame bracketing is changed to 2-, 3-, 5-, or 7-frame bracketing.
 In bracketing shots, if you select 5-frame bracketing with 1-stop increment, the bracketing
for the shots is –2, –1, 0, +1 and +2.
 This function is useful for adjusting the range of bracketing.
Changes the bracketing sequence for C.Fn-09-2/3 to increased
exposure, standard exposure, and decreased exposure
 The bracketing sequence when C.Fn-09-2/3 is selected (decreased exposure  standard
exposure  increased exposure) changes to increased exposure  standard exposure 
decreased exposure.
 This function is useful when you want to start the bracketing sequence with a increased
exposure frame.
 Even when the setting is outside the bracketing level display range, the exposure is
compensated as specified.
 This function can be used in combination with C.Fn-09-2/3 and P.Fn-09.
This function can be used in combination with P.Fn-08.