Canon EOS-1D - Basic Settings

M-57
M
4
Specifying Camera Settings in EOS Viewer Utility
Basic Settings
You can specify the owner’s name and date/time in the camera, and check the properties of
a memory card (CF card, SD card) in the camera.
1
Display the [Camera settings] dialog box (M-56).
2
Select the [Basic settings] tab.
 The [Basic settings] tab sheet
appears.
3
Specify the basic settings.
4
Click the [OK] button.
 The settings are applied and the [Camera settings] dialog box closes.
The battery level of the
camera is indicated by
[ ] or [ ]. When
you are using the DC
Coupler Kit, [ ] is
displayed.
This box shows whether a
memory card is loaded in
the camera along with the
available space on the
card and its total capacity
.
Applies the settings that
you have specified in the
[Basic settings] tab sheet
to the camera.
Restores the parameters to their
original ones and closes the [Camera
settings] dialog box.
Applies the settings that you have specified
in all the tab sheets to the camera and
closes the [Camera settings] dialog box.
Enter the name of a
camera owner. You can
enter up to 31 characters.
Enter a value or click the
[]/[] buttons to specify
t
he date and time.
Imports the date and time
from your computer.
This box shows the
camera model, body ID
(serial number) and
firmware version.