W-57
W
4
Specifying Camera Settings in EOS Viewer Utility
Basic Settings
You can specify the owner’s name and date/time in the camera, and check the properties of a
memory card (CF card, SD card) in the camera.
1
Display the [Camera settings] dialog box (W-56).
2
Select the [Basic settings] tab.
The [Basic settings] tab sheet
appears.
3
Specify the basic settings.
4
Click the [OK] button.
The settings are applied and the [Camera settings] dialog box closes.
Imports the date and time from your
computer.
This box shows whether a memory card
is loaded in the camera along with the
available space on the card and its total
capacity.
Enter the name of a camera owner.
You can enter up to 31 characters.
The battery level of the
camera is indicated by
[ ] or [ ].
When you are using the DC
Coupler Kit, [ ] is displayed.
Restores the parameters to their original
ones and closes the [Camera settings]
dialog box.
Applies the settings that
you have specified in the
[Basic settings] tab sheet
to the camera.
Enter a value or click the []/
[] buttons to specify the
date and time.
Applies the settings that you have
specified in all the tab sheets to
the camera and closes the
[Camera settings] dialog box.
This box shows the camera model, body
ID (serial number) and firmware version.
To Next Page
Loading...
