Shot Settings
W-86
You can specify the JPEG quality for each of the sizes, L (Large), M1 (Middle 1), M2 (Middle 2),
and S (Small), and then register the settings on the camera.
For more information on setting the JPEG quality on the camera, refer to “Setting the Image-
recording Quality” in the camera’s Instruction Manual.
1
Click the [JPEG quality] button (W-77).
The [JPEG quality settings] dialog
box appears.
2
Drag the slider left or right to adjust the JPEG quality.
Higher values give a lower compression ratio and higher image quality for any size.
3
Click the [Apply to camera] button.
The JPEG quality is registered on the camera.
4
Click the [Close] button.
The [JPEG quality settings] dialog box closes.
Specifying the JPEG Quality
To Next Page
Loading...
