Editing RAW Images
M-38
3
Adjust the tone curve.
Click the tone curve to show []
and drag it to a desired location.
Horizontal axis: Input level
Vertical axis: Output level
To d elet e [ ], select [] and then
press the <delete> key on the
keyboard.
Up to four of [] can be shown.
Alternatively, you can adjust the
tone curve by selecting [] on the
tone curve and entering values
directly into the [Input] / [Output]
box.
4
Click the [Update] button on the RAW adjustment tool palette.
The adjusted tone curve is applied
to the image.
While checking the adjusted tone
curve, repeat steps 2 and 4 to
make further adjustments.
5
Click the [Apply] button.
The [Tone Curve] dialog box
closes.
Windows/Macintosh compatibility for tone curve data
Tone curve data saved on your computer is compatible with EOS Viewer Utility for both
Windows and Macintosh.
To Next Page
Loading...
