Protocol Settings
3-9
3
Using a TCP/IP Network
10
On the TCP/IP Settings screen, press [FTP Print Settings] ➞
specify the following.
Specify the FTP print settings if you are using the optional UFR II/PCL/PS Printer
Kit.
[On] for <Use FTP printing>: You can use FTP as the print application.
In [User], enter the login user name for access to the FTP server.
In [Password], enter the login password for access to the FTP server.
IMPORTANT
•
If you do not specify [User] and [Password], all user names and passwords will be
valid.
•
The password will appear in the job list as a user name if you enter "anonymous"
as a login user name for access to an FTP server without specifying [User] and
[Password], or if you enter "anonymous" in [User]. (To display the job list, press
[System Monitor]
➞
[Print]
➞
[Log] on the touch panel display.)
•
The port number is 21 and cannot be changed.
11
On the TCP/IP Settings screen, press [WSD Print Settings] ➞
specify the following.
Specify the WSD print settings if you are using Windows Vista and the optional
UFR II/PCL/PS Printer Kit or the optional Super G3 FAX Board.
To Next Page