4-2
Sending Faxes
Enter the Fax Number Send the Document
Dial the recipient’s fax number with
the numeric keys.
Press [Start]. After all scanning is
complete, press [OK] to start
dialing.
If the output paper in the recipient’s machine is not
equal to the scanned size, the original image may be
reduced in size or divided into smaller parts before it is
sent.
What if...
● You enter a wrong number:
Go back to the wrong digit with [ ],
then press [Clear] to delete it. Or press
and hold [Clear] to delete the entire
entry. Then try again.
What if...
● You press [Stop/Reset] to cancel a
job during scanning documents or
after scanning documents:
The <CANCEL DURING TX/RX?>
message appears. Press [ ] to select
<Yes>. The job is canceled, and the
display returns to standby mode.
3
4
Ex.
=012XXXXXXX
To Next Page
Loading...
