17
Troubleshooting
Prepare for Wireless LAN Connection
1
Setting the Wireless LAN
2
Installing the Software
3
Troubleshooting
4
The Remote UI is not
displayed.
Cause 1
The machine’s IP address is not set correctly.
Action
• Enable the DHCP function for the wireless LAN router or access point, and
specify the setting again.
See the instruction manual of the router, or contact the manufacturer.
Cause 2
The wireless LAN router or access point network key is not correctly
specifi ed to the machine.
Action
• Enable the DHCP function f
or the wireless LAN router or access point, and
specify the setting again.
“Checking SSID or Network Key for a Wireless LAN Router/Access
Point” (P.20)
• Specify the settings again.
“Setting by Selecting the SSID (Network or Access Point)” (P.6)
Cause 3
A wrong SSID is selected.
Action
• Check the wireless LAN or access point’s SSID.
“Checking SSID or Network Key for a Wireless LAN Router/Access
Point” (P.20)
• Enable the DHCP function for the wireless LAN router or access point, and
specify the setting again.
“Setting by Selecting the SSID (Network or Access Point)” (P.6)
To Next Page
