Handling rolls
• If paper from a roll is jammed by the Paper Feed Slot
1. Open the Roll Feed Unit Cover .
2. Remove the jammed paper from the Paper Feed Slot .
After removing the paper , make sure there are no other scraps of paper in the printer . If paper
is jammed deep in the Paper Feed Slot (→P .126), remove the Roll Feed Unit and clear the
paper jam.
• If the paper is jammed by the Ejection Guide
Remove the jammed paper from the Output T ray .
After removing the paper , make sure there are no other scraps of paper in the printer .
4. Press the OK button.
Handling Paper 125
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General