Messages regarding printheads
Messages regarding printheads
Cannot adjust printhead.
Cause Corrective Action
The Printhead nozzles are clogged. Follow the steps below to check the nozzles.
1. Print a test pattern to check the nozzles.
( → P .624)
2. Clean the Printhead if the nozzles are clogged.
( → P .625)
Highly transparent lm is loaded that cannot be used
for Printhead adjustment.
W e recommend using a type of paper that you often
use, other than lm, for Printhead adjustment.
( → P .571)
Cannot adjust band.
Cause Corrective Action
The Printhead nozzles are clogged. Follow these steps below to check the nozzles.
1. Print a test pattern to check the nozzles.
( → P .624)
2. Clean the Printhead if the nozzles are clogged.
( → P .625)
Highly transparent lm is loaded that cannot be used
for automatic feed amount adjustment.
Adjust the feed amount manually .
( → P .580)
Paper is loaded that cannot be used for Standard
Adj. in Auto Band Adj. .
Execute Auto Band Adj. > Advanced Adj. .
( → P .578)
Clean x P Head (x is Left or Right)
Cause Corrective Action
The Printhead nozzles are clogged. Specify Printhead cleaning options.
( → P .625)
If the message is still displayed after you execute
Head Cleaning B one or two times, contact your
Canon dealer for assistance.
698 Error Message
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
