Other useful settings
Printing in Colors Matching the Measured Ambient Light
(W indows)
Measure the light level in the viewing environment and enter the results in the printer driver before printing.
Important
• This function requires the i1 spectrophotometer . The Light Source Measure T ool must also be installed.
• Y ou can install the Light Source Measure T ool from the User Software CD-ROM .
• For a list of supported i1 devices, refer to the manual provided with the Light Source Measure T ool .
1. Using the i1 spectrophotometer and the Light Source Measure T ool , determine the Lighting
Source T ype , Color T emperature , and Illuminance in the viewing environment.
Note
• For detailed instructions on the i1 and Light Source Measure T ool , refer to the provided instructions.
2. Choose Print in the application menu.
3. Select the printer in the dialog box, and then display the printer driver dialog box. ( → P .390)
4. Make sure the Main sheet is displayed.
5. In the A Media T ype list, select the type of paper that is loaded (for example, Glossy Photo
Paper).
Important
• Ambient light matching may not be available, depending on the type of paper used. For more
information, see the Paper Reference Guide . ( → P .104)
372 Enhanced Printing Options
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General