Printheads
10. Pull the Printhead Fixer Lever forward all the way to open it completely .
1 1. Pull up the Printhead Fixer Cover to open it completely .
12. Remove the used Printhead .
Caution
• When replacing the Printhead immediately after printing, wait a few minutes before replacing
it. The metal parts of the Printhead become hot during printing, and there is a risk of burns from
touching these parts.
Note
• Dispose of the used Printhead in accordance with local regulations.
Maintenance 629
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
