Other Maintenance
7. Open the Ink T ank Lock Lever and remove every Ink T ank .
Put the Ink T ank in a plastic bag and seal it.
Note
• Store the Ink T ank you removed with the ink holes (a) facing up. Otherwise, ink may leak and
cause stains.
8. Close every Ink T ank Lock Lever , and close the Ink T ank Cover .
At this point, ink is drawn out from inside the tubes.
Important
• Do not remove the Maintenance Cartridge during this process.
When the suction is nished, T urn Power Off!! is displayed.
9. Press the Power button and turn of f the printer .
Important
• T urn of f the printer before you unplug it. It may damage the printer if you unplug it before it is of f and
transfer it in that state. If you accidentally unplug the printer , plug it in again, reinstall the Ink T anks ,
wait until the printer comes online, and follow this procedure again.
10. Disconnect the power cord and interface cable.
Maintenance 647
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General