Control Panel
Setting Item Description, Instructions
Cutting Mode Specify whether or not to cut with the standard round-bladed
cutter .
Choose Automatic to have the roll cut automatically after
printing. If you choose Eject , the paper is cut after you hold
down the Stop button for a second or more. If you choose
Manual , the paper will not be cut after printing. Instead, a line
will be printed at the cut position.
Bordless Margin Adjust the margin during borderless printing.
Choose Automatic to have the printer automatically detect the
paper width and congure the margin settings for borderless
printing. If margins are mistakenly created when Automatic is
selected, choose Fixed . In this case, the paper width is not
detected automatically , and the document is printed without
borders, using the margin settings required by the printer .
CutDustReduct. Choose On to reduce the amount of debris generated when
cutting lm and similar media by printing a line at the cut
position. This option reduces the amount of debris given of f after
cutting. It also helps prevent adhesive from sticking to the cutter
and keeps the cutter sharp if you use adhesive paper . ( → P .138)
NearEnd Sht Mrgn Specify a margin at the leading edge of sheets to ensure better
printing quality at the leading edge.
Note that if you choose 3mm , it may lower the printing quality
at the leading edge and af fect feeding accuracy . The printed
surface may be scratched, and ink may adhere to the leading
edge.
Manual Feed When printing manually , choose the Paper Feed Slot . Normally ,
choose T op . For heavyweight paper such as POP Board ,
choose Front .
(The type of paper is
displayed here.)( *1 )
Return Defaults Choose Y es to restore Paper Details to the default values.
*1: For information on the types of paper the printer supports, refer to the Paper Reference Guide .
( → P .104) The type of paper indicated in the printer driver and related software (as well as on the
Control Panel ) is updated when you install the printer driver from the User Software CD-ROM or if you
update paper information by using the Media Conguration T ool .
58 Printer Parts
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General