13
Close the Spectrophotometer Unit Cover.
Cleaning the Spectrophotometer Eject Guide
1
Turn the printer off.
(See "Turning the Printer On and Off.")
→User's Guide
2
Unplug the power cord from the outlet.
Caution
• Always turn off the printer and unplug the power cord before cleaning or maintenance. Accidentally leaving the
printer on poses a risk of injury if you touch moving parts inside the printer.
3
If the Up-down Unit is lowered, open the Spectro-
photometer Unit Cover and lift up the central part
(near the blue label) of the Up-down Unit.
Important
• Lifting up the ends of the Up-down Unit may cause damage.
4
Wipe the surface of the Spectrophotometer Eject
Guide and the surface of the White/Black Backing
Plate clean with a dry, soft cloth.
If it is particularly dirty, use a damp cloth that you
have wrung out completely to wipe clean and use a
dry cloth to dry the surface.
Warning
• Never use flammable solvents such as alcohol, benzene, or thinner. If these substances come into contact
with electrical components inside the printer, there is a risk of fire or electrical shock.
Cleaning the Spectrophotometer Unit (option) Parts
iPF6450
Basic Guide
Consumables and Maintenance Cleaning the Printer
58
To Next Page
Loading...
Need help?
General