11. Make sure the width of the loaded roll is displayed in BRoll Width —in this case, ISO A3/A4 (297.0mm).
Note
• If the width of the roll loaded in the printer is not shown in B Roll Width, click L Printer Informa-
tion on the Main pane to update the printer information.
12. Make sure the C Page Size setting matches the original size as selected in C Paper Size in the Page Attributes
dialog box—in this case, ISO A4.
13. Select the JPrint Centered check box.
Enhanced Printing Options
>
Centering originals
>
Printing Originals Centered on Rolls (Mac OS X) iPF650
3
158
To Next Page
Loading...
