Canon imagePROGRAF iPF650 - Handling Rolls; Attaching the Roll Holder to Rolls

Handling rolls
Attaching the Roll Holder to Rolls .................................................................................................................... 568
Loading Rolls in the Printer ............................................................................................................................. 572
Changing the Type of Paper ........................................................................................................................... 575
Specifying the Paper Length ........................................................................................................................... 577
Removing the Roll from the Printer ................................................................................................................. 578
Removing the Roll Holder from Rolls .............................................................................................................. 581
Feeding Roll Paper Manually .......................................................................................................................... 582
Keeping Track of the Amount of Roll Paper Left ............................................................................................. 583
Specifying the Ink Drying Time for Rolls ......................................................................................................... 584
Specifying the Cutting Method for Rolls .......................................................................................................... 586
Cutting the Leading Edge of Roll Paper Automatically .................................................................................... 591
Reducing Dust from Cutting Rolls ................................................................................................................... 593
Attaching the Roll Holder to Rolls
When printing on rolls, attach the Roll Holder to the roll.
Rolls have a two- or three-inch paper core. Use the correct attachment for the paper core. The printer comes equipped with
the 2-Inch Paper Core Attachment installed.
Using Rolls with a 2-Inch Paper Core Using Rolls with a 3-Inch Paper Core
Holder Stopper (Left Side) Roll Holder
(Right Side)
Holder Stopper (Left Side) Roll Holder (Right Side)
2-Inch Paper Core Attachment No Attach-
ment Needed
3-Inch Paper Core Attachment L 3-Inch Paper Core Attachment R
Caution
• Set the roll on a table or other flat surface so that it does not roll or fall. Rolls are heavy, and dropping a roll
may cause injury.
Handling Paper > Handling rolls >
Attaching the Roll Holder to Rolls iPF650
6
568