Canon imagePROGRAF iPF650 - Error Exxx-XXXX (X Represents a Letter or Number); Garo Wxxxx (X Represents a Number); Hardware Error. XXXXXXXX-XXXX (X Represents a Letter or Number); Other Messages

Other Messages
GARO Wxxxx (x represents a number) ........................................................................................................... 815
ERROR Exxx-xxxx (x represents a letter or number) ...................................................................................... 815
Hardware error. xxxxxxxx-xxxx (x represents a letter or number) ................................................................... 815
Top cover is open. ........................................................................................................................................... 816
Prepare for parts replacement. ........................................................................................................................ 816
Parts replacement time has passed. ............................................................................................................... 816
Unknown file. ................................................................................................................................................... 816
Multi-sensor error ............................................................................................................................................ 817
Error in cutter position. .................................................................................................................................... 817
GARO Wxxxx (x represents a number)
Cause Corrective Action
There is a problem with the print job. Try printing again, using the correct printer driver.
It is also possible to continue printing in this state.
However, you may not be able to obtain the desired printing results.
ERROR Exxx-xxxx (x represents a letter or number)
Cause Corrective Action
An error requiring service may have occurred. Write down the error code and message, turn off the printer, and con-
tact your Canon dealer for assistance.
Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
Cause Corrective Action
The last portion of roll paper was used during a print job.
The paper was not advanced because the trailing edge is ta-
ped to the roll.
Turn off the printer and remove the roll from the printer
before restoring power.
Fastening tape or the Belt Stopper has not been removed in-
side the Top Cover.
Turn off the printer, open the Top Cover and remove
the tape or the Belt Stopper before restoring power.
An error requiring service may have occurred. Turn off the printer and wait at least three seconds be-
fore restoring the power.
If the message is displayed again, write down the error
code and message, turn off the printer, and contact your
Canon dealer for assistance.
Error Message > Other Messages >
iPF650 GARO Wxxxx (x represents a number)
12
815