Canon imagePROGRAF iPF650 - Output Stacker; Using the Output Stacker

Output Stacker
Using the Output Stacker ................................................................................................................................ 603
Using the Output Stacker
The Output Stacker can be held at two positions, as shown.
•
When storing printed documents on the Output Stacker
Use position (1).
•
When the Output Stacker is not used, or when moving the printer
Use position (2).
When moving the printer, lift the Support Rod to the Extended position. (See "Note regarding the extended posi-
tion.") →P.604
Handling Paper
> Output Stacker >
iPF650 Using the Output Stacker
6
603