Canon imagePROGRAF iPF650 - Messages Regarding Ink Ink Insufficient; No Ink Left; Remaining Level of the Ink Cannot be Correctly Detected

Messages regarding ink
Ink insufficient. ................................................................................................................................................. 806
No ink left. ....................................................................................................................................................... 806
Remaining level of the ink cannot be correctly detected. ................................................................................ 806
Unable to detect ink level correctly. ................................................................................................................. 807
Close Ink Tank Cover ...................................................................................................................................... 807
Ink tank is empty. ............................................................................................................................................ 807
Not much ink is left. ......................................................................................................................................... 807
No ink tank loaded. .......................................................................................................................................... 808
Wrong ink tank. ............................................................................................................................................... 808
Do not pull out ink tank. ................................................................................................................................... 808
Ink insufficient.
Cause Corrective Action
The ink level is low, so you cannot print, clean the Printhead,
or do other operations that require ink.
Press ▲ or ▼ to select Rep. Ink Tank, and then
press the OK button. Replace the Ink Tank that is
low with a new Ink Tank.
(See "Replacing Ink Tanks.") →P.720
Press ▲ or ▼ to select Continue to print, and then
press the OK button to resume printing. However,
note that this error may affect the printing quality.
No ink left.
Cause Corrective Action
There is no ink left. Open the Ink Tank Cover and replace the Ink Tank for which the Ink Lamp is flashing.
(See "Replacing Ink Tanks.") →P.720
Remaining level of the ink cannot be correctly detected.
Cause Corrective Action
Ink level detection cannot work cor-
rectly if you use refill ink tanks.
The refill ink tank can no longer be used. See the section Ink level detection
and take the appropriate action. (See "Ink Level Detection.") →P.789
Error Message > Messages regarding ink >
Ink insufficient. iPF650
12
806