Removing Sheets
Remove sheets from the printer as follows.
1. On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Paper tab (
).
Note
• If the Tab Selection screen is not displayed, press the Menu button.
2. Press the OK button.
The Paper Menu is displayed.
3. Press ▲ or ▼ to select Eject Paper, and then press the OK button.
4. Press ▲ or ▼ to select "Yes", and then press the OK button.
The paper is ejected from the front of the printer.
5. Holding the paper, push the Release Lever back and remove the sheet.
Handling Paper
>
Handling sheets
>
iPF650 Removing Sheets
6
601
To Next Page
Loading...
