12. Press the Back button.
13. Press ▲ or ▼ to select Register Setting, and then press the OK button.
14. Press ▲ or ▼ to select Yes, and then press the OK button.
The adjustment value is now registered, and adjustment is complete.
Adjusting Line Misalignment (Head Inc. Adj.)
If printed lines are misaligned, execute Head Inc. Adj. to adjust the angle of inclination of the Printhead. Executing Head
Inc. Adj. requires you to examine a printed test pattern and enter an adjustment value.
Paper to Prepare
Rolls An unused roll at least 10 inches wide
Sheets One sheet of unused paper of at least A4/Letter size
Perform adjustment as follows.
1. Load the paper.
• Attaching the Roll Holder to Rolls →P.568
• Loading Rolls in the Printer →P.572
• Loading Sheets in the Printer →P.594
Note
• When loading paper, specify the type of paper correctly. Using paper that you have not specified on
the printer may cause feeding problems and affect the printing quality.
• We recommend loading a type of paper that you use often.
2. On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Settings/Adj. tab ( ).
Note
• If the Tab Selection screen is not displayed, press the Menu button.
3. Press the OK button.
The Set./Adj. Menu is displayed.
4. Press ▲ or ▼ to select Adjust Printer, and then press the OK button.
5. Press ▲ or ▼ to select Head Inc. Adj., and then press the OK button.
After the Carriage is moved, a message is displayed requesting you to open the Top Cover.
Adjustments for Better Print Quality
>
Adjusting the Printhead
>
iPF650 Adjusting Line Misalignment (Head Inc. Adj.)
7
611
To Next Page
Loading...
