Canon imageRUNNER 1750i Facsimile Guide

Canceling Sending Documents
2-57
Sending Documents
2
Canceling Sending Documents
Follow the procedure below to cancel a transmission in progress.
1 Press (Stop) during transmission.
The TX Job Status screen appears.
NOTE
• If the Device screen appears, press [RX/TX].
• You can also display the TX Job Status screen by pressing [System Monitor] ➞ [RX/
TX]. (See “Checking/Deleting Documents Being Sent or Waiting To Be Sent,” on
p. 6-2.)
4 Press (Reset) to return to the top screen.
2 Select the job you want to cancel
➞ press [Cancel].
IMPORTANT
If you are logged out of Authorized
Send, [Cancel] is not available.
3 Press [Yes].
An alarm sounds and document
transmission is canceled.
A TX Report is printed automatically, unless
this feature has been turned off. (See “TX
Report,” on p. 8-9.)

Canon imageRUNNER 1750i Specifications

General

Brand	Canon
Model	imageRUNNER 1750i
Category	Printer
Language	English