Canon imageRUNNER 2830 User Manual

Finisher-S1/Puncher Unit-R1
3-17
3
Optional Equipment
Finishing Modes
The Finisher-S1 is equipped with the following finishing modes.
NOTE
If the Collate or Group mode is set, the output tray moves downward as the stack of
paper that is output increases in quantity and thickness. Once the output tray has
reached its stacking limit, printing stops temporarily. Remove all of the prints from the
output tray, and printing resumes.
■ Collate Mode
The prints are automatically collated into sets arranged in page order. The collated print
sets can be shifted by pressing [Offset].
■ Group Mode
All prints of the same original page are grouped together. The grouped print sets can be
shifted by pressing [Offset].
■ Offset Mode
The print output is shifted alternately to the front and back of the tray, in a vertical (portrait)
orientation, or a horizontal (landscape) orientation depending on the orientation of your
originals. For example, if you place LTRR originals, the paper is output and shifted in the
horizontal direction. If you place LTR originals, the paper is output and shifted in the
vertical direction.
NOTE
If you press [Offset] when either the Collate or Group mode is set, each set of prints is
shifted approximately 1 1/4" (30 mm) before it is delivered to the output tray.

Canon imageRUNNER 2830 Specifications

General

Brand	Canon
Model	imageRUNNER 2830
Category	All in One Printer
Language	English