Routine Cleaning
7-42
7
Routine Maintenance
Manual Feeder Cleaning
If originals that have been fed through the feeder have streaks or appear dirty, clean
the feeder's rollers.
CAUTION
Do not dampen the cloth too much, as this may damage the original or break the
machine.
IMPORTANT
•
Spin the rollers while cleaning them.
•
This procedure is necessary only if the optional Feeder (DADF-N1) is attached.
1
Open the feeder cover.
2
Clean the rollers (a total of three places) inside the feeder
cover with a cloth dampened with water. Then, wipe the area
with a soft, dry cloth.
To Next Page
Loading...
Need help?
General
