Entering the Department ID and Password
2-29
2
Basic Operations
3
When your operations are complete, press (ID) on the
control panel.
If you are using a control card, remove the control card, and take it with you. (See
"Card Reader-C1," on p. 3-25.)
The screen for entering the Department ID and password appears.
NOTE
•
To perform operations again, you have to re-enter your Department ID and
password.
•
If you do not press (ID) after you are finished operating the machine, any
subsequent copies made are added to the total of the Department ID you
previously entered.
•
Even if you forget to press (ID) after you are finished operating the machine, the
screen for entering the Department ID and password automatically appears after
the set Auto Clear Time elapses. (See "Auto Clear Time," on p. 4-68.)
•
After pressing (ID), all settings are canceled, and the machine returns to the
Standard mode.
7
8 9
0
To Next Page
Loading...
Need help?
General
