Canon IPF770 - HP-GL;2 Jobs Are Printed 6 MM Larger than Specified; HP-GL;2 Jobs Are Printed at Maximum Size, Even if a Standard Size Is Specified; HP-GL;2 Printing Takes a Long Time; Replotting with HP-GL;2 Jobs Is Not Possible

HP-GL/2 jobs are printed 6 mm larger than specified
HP-GL/2 jobs are printed 6 mm larger than specified
 


PageSizeProcess1On
 ➔
HP-GL/2 jobs are printed at maximum size, even if a standard size is specified
HP-GL/2 jobs are printed at maximum size, even if a standard size is specified
 


PageSizeProcess2Conserve PaperOn

 ➔
HP-GL/2 printing takes a long time
HP-GL/2 printing takes a long time
 
 
Input Resolution
600dpi
Input Resolution300dpi

 ➔
Replotting with HP-GL/2 jobs is not possible.
Replotting with HP-GL/2 jobs is not possible.
 



• 
• 
• 
• 
The printer stops when printing a HP-GL/2 job (the carriage stops moving)
The printer stops when printing a HP-GL/2 job (the carriage stops moving)
 
 
Input Resolution
600dpi
Input Resolution300dpi

 ➔
iPF770 HP-GL/2 jobs are printed 6 mm larger than specified
User's Guide
Troubleshooting HP-GL/2 problems
549