Need help?Do you have a question about the Canon ME20F-SHN and is the answer not in the manual?
General| Sensor Type | CMOS |
|---|---|
| Effective Pixels | 2.26 Megapixels |
| ISO Range | 100 to 4, 000, 000 |
| Maximum Sensitivity | ISO 4, 000, 000 |
| Lens Mount | Canon EF Mount |
| Video Output | HDMI, SDI |
| Pixel Size | 19 µm x 19 µm |
| Minimum Illumination | 0.0005 lux |
| Remote Control | Yes |
| Power Supply | DC 12V |
| Operating Temperature | -10 to 45 °C |
A step-by-step guide to preparing and setting up the network camera.
Instructions for installing necessary software for camera setup and operation.
Guidance on checking and configuring operating system and web browser security settings.
Steps to configure basic camera settings like network and administrator account.
How to launch the Camera Viewer and begin viewing video streams.
Instructions on obtaining camera control privileges and operating the camera functions.
Guide on accessing and navigating the camera's setting page interface.
Details on configuring network settings like LAN, IPv4, IPv6, DNS, and mDNS.
How to manage administrator and user accounts, and assign privileges.
Configuration of JPEG and H.264 video size, quality, and frame rate.
Configuration of camera name, system settings, and installation conditions.
Adjusting focus, camera mode, AE Shift, and custom picture settings.
Masking specific areas of the camera video for privacy protection.
Steps to configure video detection areas, criteria, and event operations.
Saving and restoring camera configuration settings to prevent data loss.
Procedure for updating the camera's firmware to the latest version.
Solutions for common problems encountered during camera operation.
Procedures for resetting the camera to its original factory default settings.
To Next Page
