Canon MF272dw - Page 74

➠ The [802.11 Authentication] scr
een is displayed.
2
Select the authentication method.
[Open System]
Uses open authentication.
* When you select this authentication method, an authentication err
or occurs when connected to a
wireless LAN router that uses a shared key. The machine setting changes to [Shared Key] at this time, and
an attempt to reconnect to the router is made.
[Shared Key]
Uses an encryption key for the password.
3
Press [Edit Encryption Key].
4
Select an encryption key that is not registered, and press [Register].
➠ The encryption k
ey input screen is displayed.
5
Enter the network key, and press [Apply].
➠ The encryption k
ey is registered to the [Encryption Key] screen.
6
Press [Select Encryption Key].
7
Press the registered encryption key.
When Using WPA-PSK or WPA2-PSK
1
Press [WPA/WPA2-PSK].
➠ The [WP
A/WPA2 Encryption] screen is displayed.
2
Select the encryption method.
➠ The encryption k
ey input screen is displayed.
When you select [Auto], AES-CCMP or TKIP is set automatically according to the wireless LAN router to
which you want to connect.
3
Enter the network key, and press [Apply].
When Using WPA-EAP or WPA2-EAP
Pr
ess [WPA/WPA2-EAP]
[OK].
When Not Using a Security Standard
Pr
ess [None].
6
Press [Yes].
➠ [Connected.] is displayed.
Setting Up
65