When Not Using a Security Standard
Select [None] and pr
ess
.
6
Select [Yes] and press
.
7
When [Connected.] is displayed on the operation panel, press .
➠ When the machine is connected to the wir
eless LAN, [
] appears on the [Home] screen.
8
Wait a few minutes.
➠ By default, an IP addr
ess is set automatically.
To use a specic IP address, set this manually.
Setting IPv4 Addresses(P. 69)
Setting IPv6 Addresses(P. 73)
If an Error Message Appears during Operation and a Connection Cannot Be Established
● Press , check the information of the wireless LAN router to which you want to connect, and repeat the
pr
ocedure starting from Step 2.
Setting Up
68
To Next Page
Loading...
