Canon mp628 User Manual

MP620 / MP628
Service Manual
Revision 0
QY8-13BZ-000
COPYRIGHTc2008 CANON INC. CANON MP620 072008 XX 0.00-0
Scope
This manual has been issued by Canon Inc., to provide the service technicians of this product with the information necessary for
qualified persons to learn technical theory, installation, maintenance, and repair of products. The manual covers information
applicable in all regions where the product is sold. For this reason, it may contain information that is not applicable to your
region.
This manual does not provide sufficient information for disassembly and reassembly procedures.
Refer to the graphics in the separate Parts Catalog.
Revision
This manual could include technical inaccuracies or typographical errors due to improvements or changes made to the product.
When changes are made to the contents of the manual, Canon will release technical information when necessary. When
substantial changes are made to the contents of the manual, Canon will issue a revised edition.
The following do not apply if they do not conform to the laws and regulations of the region where the manual or product is used:
Trademarks
Product and brand names appearing in this manual are registered trademarks or trademarks of the respective holders.
Copyright
All rights reserved. No parts of this manual may be reproduced in any form or by any means or translated into another language
without the written permission of Canon Inc., except in the case of internal business use.
Copyright © 2008 by Canon Inc.
CANON INC.
Inkjet Device Quality Assurance Div. 2
451, Tsukagoshi 3-chome, Saiwai-ku, Kawasaki-shi, Kanagawa 212-8530, Japan

Canon mp628 Specifications

General

Print Technology	Inkjet
Max Print Resolution	9600 x 2400 dpi
Number of Ink Cartridges	5
Scanner Type	Flatbed
Functions	Print, Copy, Scan
Connectivity	USB
Display	2.5" LCD
Ink Cartridge Type	Individual ink tanks
Media Types	Plain paper, Photo paper, Envelopes
Paper Sizes	Letter, Legal, Envelopes

Summary

1. MAINTENANCE

1-1. Adjustment, Periodic Maintenance, Periodic Replacement Parts, and Replacement Consumables by Service Engineer

Details service engineer tasks for adjustments, periodic maintenance, and parts replacement.

1-2. Customer Maintenance

Outlines maintenance tasks that can be performed by the end-user.

1-3. Special Tools

Lists specific tools required for maintenance and repair.

1-4. Serial Number Location

Identifies the location of the product's serial number.

2. LIST OF ERROR DISPLAY / INDICATION

2-1. Operator Call Errors (by Alarm LED Lit in Orange)

Explains errors indicated by the alarm LED and on the LCD for user intervention.

2-2. Service Call Errors (by Cyclic Blinking of Alarm and Power LEDs)

Details service errors identified by LED blinking patterns and corresponding error codes.

2-3. Other Error Messages

Lists other error messages displayed on the LCD and their causes/solutions.

2-4. Warnings

Provides warnings related to ink levels, print head temperature, and paper restrictions.

2-5. Troubleshooting by Symptom

Guides users through troubleshooting common operational issues based on symptoms.

3. REPAIR

3-1. Notes on Service Part Replacement (and Disassembling / Reassembling)

Important notes and precautions before replacing service parts or disassembling the unit.

3-2. Special Notes on Repair Servicing

Provides specific guidance and warnings for performing repair servicing.

3-3. Adjustment / Settings

Details procedures for adjusting and configuring various machine settings post-repair.

3-4. Verification After Repair

Outlines the standard inspection flow to verify proper operation after repair.

4. MACHINE TRANSPORTATION