To Next PageTo Next PageWhat to do if Canon Camcorder cassette compartment stopped during loading/ unloading?
If the Canon Camcorder cassette compartment stopped during loading/ unloading, replace or charge the battery pack.
How to fix Canon Camcorder will not focus?
If the Canon Camcorder will not focus, try these steps: First, autofocus may not work on the specific subject, so try focusing manually. Also, adjust the viewfinder using the dioptric adjustment lever. Lastly, ensure the lens is clean.
How to fix Canon Camcorder memory card cannot be recorded?
If the Canon Camcorder is not recording to the memory card, make sure a memory card is inserted. If it is full, replace the memory card or erase images. You can also initialize the memory card. As a last resort, set [FILE NOS.] to [RESET] and insert a new memory card.
What to do if Canon Camcorder cassette compartment will not open?
If the Canon Camcorder cassette compartment will not open, the battery pack may be exhausted. Try replacing or charging the battery pack. Also, ensure that you fully open the cassette compartment cover.
What to do if Canon MVX450 tape is running, but image will not appear on the TV screen?
If the tape is running, but the image will not appear on the TV screen of your Canon Camcorder, set the TV/VIDEO selector on the TV to VIDEO. Also, clean the video heads.
What to do if pressing the start/stop button will not start recording on Canon MVX450?
If pressing the start/stop button on your Canon Camcorder will not start recording, set the switch to CAMERA and load a cassette. If “END” is flashing on the screen, rewind the tape or replace the cassette. If the cassette is protected (“ ” flashes on the screen), change the position of the protect switch.
What to do if Canon Camcorder image will not appear on the screen?
If the Canon Camcorder image will not appear on the screen, set the switch to CAMERA and open the lens cover.
What to do if Canon MVX450 Camcorder battery pack will not charge?
If the Canon Camcorder's battery pack will not charge, make sure you are charging the battery pack in temperatures between 0 °C and 40 °C. If the temperature is too high, wait until the battery pack temperature is below 40 °C and retry charging. You can also try using a different battery pack.
Why does my Canon MVX450 switch off by itself?
If your Canon Camcorder switches off by itself, the battery pack may be exhausted. Replace or charge the battery pack. You can also try to turn on the camcorder.
How to fix Canon MVX450 viewfinder picture is blurred?
If the viewfinder picture on your Canon Camcorder is blurred, adjust the viewfinder with the dioptric adjustment lever.
Covers attaching the battery pack and charging it for camcorder operation.
Details the procedure for properly inserting and loading a video cassette.
Explains how to insert and remove SD or MultiMedia cards for storage.
Covers setting the camcorder's internal clock and time zone for accurate recording data.
Step-by-step instructions for recording video content onto a cassette tape.
Guide on how to record still images and movies onto an SD or MultiMedia card.
Instructions on how to review recorded video content from a cassette tape.
Guide on how to view still images and movies stored on a memory card.
How to manually control exposure settings to compensate for difficult lighting conditions.
Guide on manually setting focus when autofocus may not perform optimally.
Procedures for setting accurate white balance for realistic color reproduction.
How to choose the resolution and compression level for still images and movie clips.
Instructions on how to delete unwanted still images or movies from the memory card.
Process for formatting a memory card to ensure compatibility and erase all data.
How to copy recordings from the camcorder to external video devices.
Guide on recording video from analog sources via the AV terminal.
Instructions for transferring digital video via the DV terminal to the camcorder's tape.
Steps for adding or replacing audio tracks on recorded tapes.
How to convert analog video/audio signals to digital format using the DV terminal.
Guide on connecting the camcorder to a PictBridge compatible printer for direct printing.
Details on adjusting print parameters like paper size, type, and layout options.
Steps to transfer video footage from the camcorder tape to a computer via DV terminal.
Guide on transferring still images and movies from the memory card to a PC using USB.
General| Filter size | 27 mm |
|---|---|
| Digital zoom | 800 x |
| Optical zoom | 20 x |
| Focal length range | 43.7 - 878 mm |
| Sensor type | CCD |
| Total megapixels | 1.33 MP |
| Optical sensor size | 1/5 \ |
| Effective megapixels (movie) | 750000 MP |
| Display diagonal | 2.7 \ |
| Display resolution | 123000 pixels |
| I/O ports | AV |
| Resolution | 640 x 480 pixels |
| Camera shutter speed | 1/2000 ~ 1/6 s |
| Battery type | BP-208DG |
| Minimum illumination | 2 lx |
| PictBridge | Yes |
| USB 2.0 ports quantity | 1 |
| Camcorder tape type | Mini-DV |
| Compatible memory cards | MMC, SD |
| Viewfinder resolution | 113000 pixels |
| Product color | Silver |
Weight and Dimensions| Depth | 109 mm |
|---|---|
| Width | 57 mm |
| Height | 77 mm |
| Weight | 430 g |
