Slow Scanning Speed
Check 1: To view the image on a monitor, set the output resolution to
around 150 dpi. To print, set it to around 300 dpi.
Resolution
Check 2: Set Fading Correction, Grain Correction, etc. to None.
Refer to "Image Settings" for your model from Home of the Online Manual for details.
Check 3: In IJ Scan Utility, deselect the Correct slanted text document /
Detect the orientation of text document and rotate image checkbox and
scan again.
Settings (Document Scan) Dialog
Settings (Custom Scan) Dialog
To Next Page
Loading...
