I. FEATURES
1. Generates 90 copies per minute (in stream reading mode) and provides a large-capacity
source of paper (6,100 sheets).
• It generates as many as 90 copies every minute (A4/LTR).
• It is designed as a front loading type, enabling efficient use of office space.
• It accommodates 1,000 sheets of copy paper in its front upper and lower trays, 4,000 sheets in its
paper deck, and 100 sheets in its multifeeder.
2. Accepts continuous paper (when equipped with the optional C.F.F.).
• It accepts continuous paper (e.g., computer form originals generated by a computer) with the help
of the optional C.F.F. so that the paper may be used without separating the pages.
• It accepts originals ranging in size between 203.2 and 381.0 mm (between 8 and 15 in) in width and
between 203.2 and 304.8 mm (between 8 and 15 in) in length (feeding direction).
• It handles continuous copying from continuous paper (equivalent of as many as 500 pages of 80
g/m
2
paper).
3. Full range of accessory for high-speed copying work.
• RF-D1 : Automatic original feeding device of an original circulating type.
• Stapler Sorter-E2 : 20-bin sorter capable of automatic stapling after sorting and grouping.
• C.F.F. : Automatic continuous paper (computer form) feeder for continuous
copying. (With its real-time AE mechanism, 1-on-1 60 sheets may be
dealt with in AE or non-AE mode.)
• Control Card-V : Control device capable of keeping track of copies made by as many as
200 different groups.
• Copy Data Controller-A1 : Control device capable of keeping track of copying volume and
machine control/status communication.
• Remote Diagnostic
Device 2 : Control device capable of machine control/status communication.
1. GENERAL INTRODUCTION
COPYRIGHT © 1996 CANON INC. CANON NP6085 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
1-1
To Next Page