Canon PCL6 - Installing as a Print Server

Installing as a Print Server
This explains how to congure the share settings of and install the driver in order to use a computer connected
to the device as a print server.
Prerequisites
● When starting the computer, logon as a member of Administrators.
● [Desktop] screen display (when using Windows 8.1/Server 2012 R2)
Procedures
1
Start the installer → proceed according to the instructions on the screen.
2
Select [Standard] or [Custom] for [Printer Setup] → click [Next].
If you have a network connection that does not use the TCP/IP protocol, select [Custom].
3
If the [Select Process] screen is displayed, select [Add new printers] → click [Next].
4
Select the device to install from [Printer List] → click [Next].
If you select [Standard] and congure shared settings, select [Congure printer information], then click [Next].
5
Select [Use as shared printer] → change [Shared Name] if necessary → click [Next].
If you select [Custom] and congure shared settings, set the port in [Port], then click [Next].
Changing Settings to Match the Usage Environment
43