Canon PCL6 - Saddle Stitched Booklet Printing

Saddle Stitched Booklet Printing
When performing booklet printing, you can specify stapling in the center of the output pages. The pages are
divided into sets and folded in half, and each set is saddle stitched in the center.
1
Display the [Main] sheet.
2
Select [Booklet Printing].
You can also set [Booklet Printing] in the [Layout] sheet.
3
Select [On] from [Staple] → select [Saddle stitch] as the stapling position.
You can also set [Staple] in the [Finishing] sheet.
Related Topics
[Main] Sheet(P. 115)
[Layout] Sheet(P. 118)
[Finishing] Sheet(P. 124)
Booklet Printing(P. 85)
Saddle Press Processing When Creating Saddle Stitched Booklets(P. 89)
Trimming Pages When Creating Saddle Stitched Booklets(P. 90)
Creating a Booklet
88