Installing by USB Connection
You can connect the device and computer with a USB cable and install the driver.
Prerequisites
● System Requirements(P. 16)
● Installation of the optional USB interface board (if required with the device you are using)
● Page description language selection (plug & play) function setting of the device (if required with the device
you are using)
Set [PDL Selection (Plug and Play)] at the device to match the driver you are using. For details about the
setting method, refer to the manual of the device.
- For "UFR II/UFRII LT/LIPSLX/CARPS2 V4 Printer Driver": [*** (V4)] (or [*** (XPS)])
*** represents the page description language corresponding to the device.
- For "PCL6 V4 Printer Driver": [PCL6 (V4)] (or [PCL6])
● Notes and Warnings Regarding Installation(P. 17)
● When starting the computer, logon as a member of Administrators.
● [Desktop] screen display (when using Windows 8.1/Server 2012 R2)
Procedures
1
Turn off the device.
2
Double-click [Setup.exe].
3
If you want to change the language displayed by the installer, select [Language] →
click [Next].
The driver will be installed according to the selected language.
4
Read the CANON SOFTWARE LICENSE AGREEMENT → click [Yes].
5
Select [USB Connection] → click [Next].
Installing the Driver
29
To Next Page
Loading...
