Initial Preparations
22
Adjust the date and time as follows.
Access the camera menu.
z Touch H, and then touch n.
Choose [Date/Time].
z Touch the 3 tab.
z Drag up or down across the screen to choose
[Date/Time].
z Touch [Date/Time].
Change the date and time.
z Follow step 2 on p. 21 to adjust the settings.
z Double-touch ^ to close the menu.
• Unless you set the date and time, the [Date/Time] screen will be
displayed each time you turn the camera on. Specify the correct
information.
• To set daylight saving time (1 hour ahead), touch and choose in step 2.
Changing the Date and Time
• Date/time settings can be retained for about 3 weeks by the camera’s built-in
date/time battery (backup battery) after the battery pack is removed.
• The date/time battery will be charged in about 4 hours once you insert a charged
battery or connect the camera to an AC adapter kit (sold separately, p. 163),
even if the camera is left off.
• Once the date/time battery is depleted, the [Date/Time] screen will be displayed
when you turn the camera on. Follow the steps on p. 21 to set the date and time.
To Next Page
Loading...
Need help?
General
